SC-3257 INTERNAL CONDUCTIVE COATING STUD COAT

PRODUCT DESCRIPTION: 
The SC-3257 Stud Coating is a blend of graphite, glass frit in a blend of organic solvents designed for use on the face panel of cathode ray tubes after filming lacquer application.

FEATURES: 
The coating may be applied by brush or sponge and produces a smooth hard deposit which reduces the potential for loose particles and high voltage arcing in the tube.

TYPICAL PRODUCT SPECIFICATIONS:
Solids: 30 to 33 %
Spec. Gr. 1.05 to 1.20 g/cc
Viscosity: 200 to 300 cps Brookfield LVT(#3, 60 rpm @ 25 *C)
Resistance: less than 500 Ohms/sq. (I mil dry/25 u/m)

MIXING INSTRUCTIONS:
The SC-3257 should be rolled at least four hours before using making sure that
any settling has been completely mixed into suspension..

APPLICATION: 
The coating can be applied by brush or sponge.

STORAGE and HANDLING: 
Store in original container in a cool dry area away from heat or open flame and out of direct sunlight at approximately 40 to 70 *F (5 to 25 'C), Shelf life is 6 months from date of manufacturing with pot life of one week after container has been opened..

SHIPPING: 
Available in one or five gallon plastic or steel containers.

FOR INDUSTRIAL USE ONLY