ODW-3550 OUTER CONDUCTIVE COATING

PRODUCT DESCRIPTION:
Outer Conductive Coating ODW-3550, is a blend of graphite and conductive carbon in a modified acrylic resin systems and water. This material is formulated to provide a conductive coating on the exterior funnel of the cathode ray tube.

FEATURES: The ODW-3550 coating may be applied by roller, sponge or brush and produces a smooth hard scratch resistant deposit with excellent adhesion on glass. The thoroughly dried film has superior humidity and water resistant.

TYPICAL PRODUCT SPECIFICATIONS:
Color: Black
Solids: 34 to 40 %
Spec. Gr, 1. 144 to 1, 175 g/cc
Viscosity: 500 to 600 cps Brookfield LVT(#3 @ 60 rpm -25 'C)

ELECTRICAL RESISTANCE: 3 mil draw down less than 40 Ohms/sq. 5 mil draw down less than 25 Ohms/sq.

DRYING: The coating will air dry in 10 to 20 minutes or heated forced air will accelerate drying.

MIXING INSTRUCTIONS: The ODW-3550 must be rolled or mixed thoroughly before use.

APPLICATION: The coating may be applied roller coating, brush or sponge. The coating is ready to use. THINNING: Not required. To lower viscosity small amounts of D.I. water can be added if necessary.

SHIPPING, STORAGE and HANDLING:
Store in original container in a cool area out of direct sunlight at approximately 40 to 70 *F (5 to 25 *C). Shelf life is 6 months. Available in five or fifty-five gallon, lined containers. Also, available in 5 gallon plastic pails. DO NOT FREEZE FOR INDUSTRIAL USE ONLY