DX-1584-B-III CONDUCTIVE COATING

PRODUCT DESCRIPTION:
.DX-1584-B-III is a water based coating material designed to provide surface electrical conductivity to substrates such as plastic sheet and foam, glass, paper, etc.
FEATURES: DX-1584-B-III provides a flexible coating with excellent adhesion to a variety of substrates including many plastic films and foam, glass, cardboard, paper, etc. The coatings are very conductive when dried, thereby preventing build-up of static
charges.

TYPICAL PRODUCT DATA:
Color - Black
Wt./Gal. - 9.10 - '9.5 lbs
Total Solids - 34 - 38%
viscosity - 400-500cps (Brkfld #3 spindle @ 60 rpm - 77' F
Flash Point - None

APPLICATION:
Method This material may be applied by spraying, rolling,
dipping or brushing.
Reduction If needed deionized water may be used.
Agitation This material has been formulated to prevent hard
settling of the pigments. However, after long
periods of storage some soft settling may occur.
The pigments may settle out much faster when
material is diluted.
Drying Sprayed coatings on smooth surfaces will dry at
room temperature within 20-30 min. Porous
substrates such as plastic foam may require forced
air at temperatures of above 220' F.

PERFORMANCE
Electrical Less than 500 ohms resistance per linear inch at a
Conductivity) dry film thickness of one mil.

Humidity After complete drying coating will not blister
when submerged in deionized water for 24 hours.

Adherence After complete drying, a strip of #600 scotch tape
will not remove coating from glass.
STORAGE & HANDLING DO NOT FREEZE Material should be used within six
months of date of manufacture.
PACKAGING Five or fifty-five gallon epoxy phenolic lined
(non-returnable) open head steel pails and drums.