1-2038 INTERNAL CONDUCTIVE COATING PATCH COAT

PRODUCT DESCRIPTION: The 1-2038 Patch Coating is a blend of graphite, iron oxide in sodium silicate, and deionized water. This material is formulated to provide a hard conductive coating over 1-2033, 1-2034 or 1-2036 on the funnel of cathode ray tubes.

FEATURES: The coating may be applied by brush or sponge and produces a smooth hard chalk resistant deposit that reduces the potential for loose particles and high voltage arcing in the tube.

TYPICAL PRODUCT SPECIFICATIONS:
Solids: 38 to 42 %
Spec. Gr. 1. 10 to 1. 3 5 g/cm3
Viscosity: 13 0 to 2 10 cps Brookfield LVT(#2, 60 rpm (t-b
25 'C)
13 to 20 seconds # 2 ZAHN
Resistance: < 150 Ohms/sq. (I mil dry film)

MIXING INSTRUCTIONS:
The 1-2038 PC should be rolled at least four hours before using.

APPLICATION:
The coating may be applied with a brush or sponge. The coating is ready to use.

STORAGE and HANDLING:
Store in original container in a cool area out of direct sunlight at approximately 40 to 70 'F (5 to 25 'Q). Shelf life is 6 months.

SHIPPING:
Available in five gallon or fifty-five gallon lined containers.  Also available in 5 gallon plastic container. DO NOT FREEZE.

FOR INDUSTRIAL USE ONLY