1-2037 INTERNAL CONDUCTIVE COATING
FLOW COAT CONCENTRATE
test
PRODUCT DESCRIPTION: The 1-2037 Flow Coat Concentrate, a water based material designed for the internal conductive coating of cathode ray tubes.

FEATURES:
The concentrate provides the flexibility to mix small quantities as required. The concentrate also provides lower shipping costs from conventional coatings.

MIXING INSTRUCTIONS: The 1-2037 FCC should be rolled at least four hours before let down.

Mixing Ratio:
240 parts 1-2037 FCC
140 parts Kasil #I or equivalent
120 parts DI-Water
Slowly add the potassium silicate and DI-water to the concentrate while under continuous mixing.  After all ingredients have been added cover the container and stir slowly or roll for 12 hours before using.  If the mixture is stored for any period of time it must be stirred or rolled at least 4 hours before reuse.

PRODUCT SPECIFICATIONS:
Concentrate Solids 56 to 59 %
Spec. Gr. 1.70 to 1.75 g/cc
Let Down Solids 30 to 35 %
Spec. Gr. 1.30 to 1.35
Viscosity 50 to 150 cps Brookfield LVT #1, 60 rpm at 25 'C
Resistance 500 to 1500 Ohms/sq. (I mil dry film)

STORAGE and HANDLING: Store in original container in a cool area out or direct sunlight at approximately 60 to 90 'F (15 to 32 'C).

SHIPPING: Available in one or five gallon lined containers.
FOR INDUSTRIAL USE ONLY